- ±0.3°C accuracy
- CAL CHECK®
- Ideal for spot checks
- Fast and accurate results
If you ever wished that your temperature measurements could be made a little easier, the Checktemp® might just be what you’re looking for! The Checktemp® offers high accuracy over a wider range without worrying about breakage or condensation.
The Checktemp® offers NO breakage, NO waste, NO injuries, NO difficulty in reading; not even a parallax error by taking a wrong measurement due to the angle of view!
Checktemp® is provided with HANNA’s unique CAL CHECK™ function for accurate measurements every time: simply activate a switch and the instrument will simulate an ice bath of 0.0°C (32.0°F) signal that is displayed on the LCD within a range of ±0.3°C (±0.5°F).
The sharp-tip probe of the Checktemp® easily penetrates semisolid products, making routine controls simple and quick for both incoming and outgoing goods. Checktemp® is the ideal instrument for measuring temperature according to HACCP requirements.
Models with factory calibration certificate against NIST standards are also available.
Order Information:HI 98501 (Checktemp®C) is supplied with penetration probe, protective cap, battery and instructions. For model with Factory Calibration Certificate, order HI 98503
|Range||-50.0 to 150.0°C|
|Accuracy||±0.3°C (-20 to 90°C) ±0.5°C (outside)|
|Probe||fixed stainless steel 105 x dia 3 mm (4.1 x dia 0.1") (penetration)|
|Battery Type / Life||1.5V / approximately 3000 hours of continuous use|
|Environment||0 to 50°C (32 to 122°F); RH max 95%|
|Dimensions||66 x 50 x 25 mm (2.6 x 2.0 x 1.0") - meter only|
|Weight||50 g (1.8 oz.) - meter only|